Clean-It Everyday Cleaner

£9.58£36.00 (Inc. VAT)

Clear
TT Paving Solutions Clean-It PH neutral routine cleaning solution for porcelain, stone, and cementitious products.

Use our solutions in combination with our Macchia and Ventosa to achieve a quicker application and maximum results.
Size: 1 L / 5 L
Deep cleaning and degreasing: 14 – 15m2
Tile and grout refresh: 1:12 – 45m2
Maintenance clean: 1:200 (1 cap to 5lt of water, polished surfaces may require a dry buff)
Number of pieces per pack: N/A
CONTAINS: 2-(2-Butoxyethoxy) Ethanol <10%, Sodium xylene sulphonate <10%, Gellie perfume <1%
Finish (edge): N/A
Finish: N/A
Where can I uses this product? : porcelain, stone, and cementitious products.
Available: N/A
Country of origins: N/A
Tolerance: N/A
Frost resistant: N/A
Store Everyday Cleaner in a cool dry place and keep away from heat at all times. Keep out of the reach of children and pets. Do not mix with other chemicals. DANGER: IRRITANT EUH208: Contains gellie perfume. May produce an allergic reaction. If in contact with eyes, rinse with water immediately. If irritation persists, seek medical advice. CONTAINS: 2-(2-Butoxyethoxy) Ethanol <10%, Sodium xylene sulphonate <10%, Gellie perfume <1% Must read entire label and technical data sheet before use. It is the user’s responsibility to determine the suitability of the product for the intended use. How to use
  1. Depending on the level of soiling, dilute Clean-It to the correct dilution rates with either hot or cold clean water.
  2. Sweep or use our Ventosa vacuum to remove any loose soils or debris.
  3. Apply the cleaner to the surface and leave to act for 3 minutes, do not allow the product to dry into the surface.
  4. Agitate the product into the surface using our TT Macchia Machine or deck brush.
  5. Once the desired result is achieved, extract all soils using our Ventosa vacuum or sponge and bucket with clean water. Use cloths to remove any leftover residue or damp patches.
  6. Repeat the process on extremely dirty surfaces.
  7. Rinse well with fresh clean water to ensure all residue is removed or mop once with 1 cap of Everyday Cleaner to 5lt of fresh clean water – this will dry streak-free, no need to rinse.
  8. Failure to follow the instructions may result in damage to the surface.
Technical Data Sheet
Please click on the link below to view the delivery information.

Click Here
Product has been added to your cart