Remove-It Rust Remover

1 L

£30.00 (Inc. VAT)

TT Paving Solutions Remove-It Rust Remover is a highly effective rust remover for natural stone and porcelain. Not intended for use on vinyl or plastic surfaces.

Ready to use Works deep into the stone or porcelain flag Suitable for external and internal use
Size: 1 L
Initial wash/grout haze removal: N/A
Builders clean refresh: N/A
Maintenance clean: N/A
Number of pieces per pack: N/A
CONTAINS: See technical data sheet
Finish (edge): N/A
Finish: N/A
Where can I uses this product? : Natural stone and porcelain.
Available: N/A
Country of origins: N/A
Tolerance: N/A
Frost resistant: N/A
  Keep the room well ventilated whilst using this product. Keep away from children and pets. Exposure to the skin may cause dryness and cracks. Harmful if swallowed. Irritant to eyes and skin. Wear suitable protective gloves. DANGER: IRRITANT H315: Causes skin irritation. H317: May cause allergic skin reaction. H319: Causes serious eye irritation. H335: May cause respiratory irritation. P260: Do not breath dust/fume/gas/mist/vapours/spray. P280: Wear protective gloves/protective clothing/eye protection/face protection. P301+P330+P331: If swallowed rinse mouth. DO NOT induce vomiting. P303+P361+P353: If on the skin (or hair), remove all contaminated clothing. Rinse skin with water/shower. P305+P351+P338: If in eyes rinse cautiously with water for several minutes. Remove contact lenses if present and safe to do. Continue rinsing. Must read entire label and technical data sheet before use. These can be found at It is the user’s responsibility to determine the suitability of the product for the intended use. How to use
  1. Apply the Rust Remover to the area of rust you wish to remove.
  2. Cover the rust completely making sure the product stays wet over the surface.
  3. Leave Rust Remover to act on the surface for up to 1 hour. Rinse and remove the residue with a damp cloth.
  4. Do not allow the product to dry into the surface of the tile or stone.
  5. If necessary repeat the process until the rust has completely gone.
  6. Once the desired result is achieved remove all solution and residue with a clean sponge and water, using cloths to dry off the area completely.
  What will it remove TT Paving Solutions Rust Remover is ideal for removing a build-up of rust that is present on porcelain tiles and natural stone. Always test on a small area first. If using on polished stones check to make ensure there is no change in appearance.     Technical Data Sheet
Please click on the link below to view the delivery information.

Click Here
Product has been added to your cart